国产在线综合网站,婷色综合av,精品美女久久久久久高潮,嫩草伊人久久精品少妇av

撥號18861759551

你的位置:首頁 > 技術文章 > 使用C型可調對焦鏡頭

技術文章

使用C型可調對焦鏡頭

技術文章

Using C-Mount Focus Tunable Lenses

Introduction

Optotune Electrically Focus-Tunable Lenses provide flexible, fast-focusing solutions for a wide variety of machine vision applications, including quality control, sorting, or bar code reading. Unlike traditional optical setups, in which mechanical adjustments must be made for objects at different working distances, Optotune’s Electrically Focus-Tunable Lenses take only milliseconds to refocus and are free of mechanical translation. In addition to focusing applications, these lenses can reduce the number of light sources and the overall power consumption of adaptive illumination applications by providing highly flexible lighting parameters.

The C-mount version of the standard electrically focus-tunable lens (EL-10-30), the Optotune C-Mount Focus-Tunable Lens (EL-10-30-C), is compatible with standard industrial cameras. To allow for additional adjustments to the focal range, an offset lens can be integrated into the C-mount focus-tunable lens. When combined with a positive power offset lens, the tunable lens can achieve short focal lengths and be used directly with standard industrial cameras. With a negative power offset lens, the lens combination can be focused at infinity, allowing the EL-10-30-C to be placed in front of existing optical components as a close-up lens for fixed focal length lenses. Various configurations for different specifications are described in more detail in this application note.

 

Offset Lens

The EL-10-30-C’s protective glass can be replaced by a 12mm or 12.7mm diameter offset lens. This allows the focal range to be shifted to any desired value. For example, the VIS coated Optotune C-Mount Focus-Tunable Lens (#88-937) has a standard focal range of +200 to +80mm. By integrating an offset lens with a focal length of -150mm (#86-905), the focal range can be extended from about -600mm to infinity to +170mm (1/fres = 1/fEL-10-30 + 1/foffset). Note: The maximum allowable thickness of the offset lens is 4.7mm.

 

Doublet Configuration: EL-10-30-C for Camera Lenses

Table 1: Recommended Offset Lenses

Distance (D)

Focal Length of Offset Lens

Offset Lens Stock No.

Field of View*

Resulting Focal Length Range

12.5mm

20mm

#49-917

22.3°

16 – 18mm

17.5mm

30mm

#45-484

17.4°

22 – 26mm

25mm

42mm

#45-485

13.1°

28 – 35mm

*Full horizontal field of view on ½" format

 

Integrating a plano-convex offset lens creates a doublet system, and can be combined directly with standard industrial cameras. Focal lengths as short as 16mm can be achieved for sensor sizes up to ½". Figure 1 and Table 1 show the setup with recommended offset lenses depending on the distance (D) between the EL-10-30-C and the camera sensor. By changing the current applied to the tunable lens, refocusing for different working distances from 100mm to infinity can be achieved. Figure 2 shows a series of images taken at different working distances using an EL-10-30-C and a 30mm focal length plano-convex offset lens, an f/# of 5, and a C-mount camera with a ½" sensor size.

 

Figure 2: EL-10-30-C with Integrated 30mm FL PCX Lens

 

Close-Up Configuration: EL-10-30-C in Combination with Fixed Focal Length Lens

With an integrated plano-concave offset lens, the EL-10-30-C can also be used as a close-up lens for fixed focal length lenses. This combination creates a high optical quality, electronically controllable focusing unit. The fixed focal length lens alone would need to be refocused to accommodate different working distances. In the combined setup, all of the elements stay at a fixed position; only the curvature of the tunable lens is varied to achieve focusing for different working distances.

Figure 3: Diagram of Combined Setup

 

Figure 4: Combined Setup with Stock Numbers

 

An example of a combined setup can be seen in Figures 3 and 4. A -150mm focal length plano-concave offset lens (#86-905) is used with the plano side facing the tunable lens.

Figure 5: Optical Quality Comparison of Traditional and Combined Setups

 

The images in Figure 5 demonstrate that a combined setup can achieve the same level of quality as using only a fixed focal length lens. This configuration has a field of view of 14.5° (for ½" sensor sizes) and operates at f/4.

 

To prevent vignetting, it is recommended to use a fixed focal length lens with a short distance between the s position and the front of the lens. Vignetting is also a concern when using standard wide field lenses with short focal lengths and a field of view greater than 20° (for ½" sensor sizes). Recommended fixed focal length lenses with different field of views ranging from 6.2° to 14.5° (for ½" sensor sizes) are listed in Table 2.

 

Table 2: Recommended Fixed Focal Length Lenses for Multiple FOV, FL, and f/#

Field of View*

Stock Number

Focal Length

Working Distance

Aperture (f/#)

Maximum Sensor Size

14.5°

#85-357
#85-358
#85-359
#85-360

25mm

20mm – ∞

Fixed: 2.8
Fixed: 4
Fixed: 5.6
Fixed: 8

2/3"

14.5°

#59-871

25mm

20mm – ∞

Variable: 2.8 – 17

2/3"

13.3°

#58-207
#69-266
#83-955

25mm

60mm – 1200mm

Fixed: 2.5
Fixed: 4
Fixed: 8

1/2"

10.4°

#85-365
#85-366
#85-367

35mm

50mm – ∞

Fixed: 4
Fixed: 5.6
Fixed: 8

2/3"

10.4°

#59-872

35mm

50mm – ∞

Variable: 4 – 22

2/3"

8.2°

#54-689

35mm

90mm – ∞

Variable: 4 – closed

1/2"

6.2°

#59-873

50mm

100mm – ∞

Variable: 5 – 22

2/3"

*Full horizontal field of view on standard ½" sensor

 

Wavefront Quality Dependent on Orientation and Focal Length Range

In principle, Optotune’s focus tunable lenses exhibit a spherical lens shape (the nominal parameters can be found in the ZEMAX package, which are located on the product page). Since the membranes used are elastic, the lens shape is influenced by gravity. With the lens oriented with the optical axis vertical, the RMS wavefront error of the EL-10-30-C series is in the order of 0.1λ (measured at 525nm). With the lens configured with a horizontal optical axis, a Y-coma term must be added; therefore, for the highest quality imaging, it is recommended to use the EL-10-30-C with the optical axis positioned vertically.

Figure 6: Wavefront Measurement of Electrically Focus-Tunable Lenses (at 532nm and 80% Clear Aperture)

 

Furthermore, as can be seen Figure 6, the lens exhibits a smaller wavefront error when it is less curved corresponding to longer focal lengths. It is recommended to set the position of the fixed focal length lens such that the tunable lens can be operated in the long focal range corresponding to low current values.

 

Response Time

The rise time on a current step is about 2.5ms. However, it takes about 15ms until the lens has fully settled.

 

Controlling Electrically Focus-Tunable Lenses

The EL-10-30-C’s focal length is controlled by changing the input current (0 – 300mA). For simple focusing applications, a calibration using a look-up table is sufficient to achieve good repeatability. If the heating of the lens is significant, then sensing the temperature is recommended to calculate more precise look-up values. Each lens has a temperature sensor and 256 bytes of memory built in.

聯系我們

地址:江蘇省江陰市人民東路1091號1017室 傳真:0510-68836817 Email:sales@rympo.com
24小時在線客服,為您服務!

版權所有 © 2025 江陰韻翔光電技術有限公司 備案號:蘇ICP備16003332號-1 技術支持:化工儀器網 管理登陸 GoogleSitemap

在線咨詢
QQ客服
QQ:17041053
電話咨詢
0510-68836815
關注微信
嗯嗯嗯啊啊啊视频免费看| 久久精品国产自| 产精品96久久久| 超碰在线日本人工| 91久中文字幕| 超碰欧美成人| 韩国精品人妻| 91在线无码| 午夜大香蕉一区二区三区视日本| 日本综合无码一区| 三级在线观看一区 麻豆| 美国午夜福利一级片| 色香天堂色香天堂色香天堂17| cao porn 冰美式| 日韩射一区二区三区| 怀柔区| 91麻豆手机基地你懂的| 日韩欧美xx成人在线| 久久久久久久熟| 国产吃瓜自拍视频网站| 久久人妻少妇嫩草AV蜜桃动态图 | 免费人妻激情视频| 日韩久久无码精品不卡一区二区| 中国国产黄色录像| 欧美精品久久久久久久久99蜜桃臀| 操插少妇视频| 天天干天天操,天天奸| 女子日B视频免费看| 青青操在线视频干| 亚洲最大视频图片一区 | 亚洲无码视频专区在线观看视频在线 | 日本乱码一区二区三区四区| 天天干天天要天天想天天爽| 午夜亚洲精品一区二区三区| 亚洲日韩欧美精品国产区一区二区| 国产夫妻性| 色综合yeye| china国产精品视频91| 日日夜夜欧美日| 日日夜夜狠狠操| 熟女/二三四区|