你的位置：首頁 > 產品展示 > 光學儀器 > 其他儀器配件 >202型臭氧檢測儀配件
產品詳細頁
202型臭氧檢測儀配件
- 產品型號：
- 更新時間：2023-12-17
- 產品介紹：202型臭氧檢測儀配件Air Pump for Model 202 Ozone Monitor （quiet, long-life）SKU: OZPUMP202QUIETInternal air pump for Model 202 Ozone Monitor with serial numbers 1900 and above （unless purchased with the Lo
- 廠商性質：代理商
- 在線留言
產品介紹
| 品牌 | 其他品牌 | 價格區間 | 面議 |
|---|---|---|---|
| 組件類別 | 光學元件 | 應用領域 | 醫療衛生,環保,化工,電子 |
202型臭氧檢測儀配件
202型臭氧檢測儀配件
| Air Pump for Model 202 Ozone Monitor (quiet, long-life) SKU: OZPUMP202QUIET Internal air pump for Model 202 Ozone Monitor with serial numbers 1900 and above (unless purchased with the Low-Power Option) |
| Air Pump for Model 202 Ozone Monitor (SN < 1900) SKU: OZPUMP202OLD
Air Pump and Cable (5k hr) for Model 202 Ozone Monitor with Serial Numbers below 1900; also for newer Model 202 monitors purchased with the Low-Power Option; Sensidyne AA with Neoprene Vacuum Diaphragm |
| Internal Long Life/Cold Weather Air Pump for Model 202 and 205 Ozone Monitor SKU: OZPUMPLONGLIFECOLDWEATHER |
| Flow Meter Assembly for Models 202 and 205 Ozone Monitors SKU: FLOWMETER |
| Lamp Assembly (w/Delrin block) for Model 202 Ozone Monitor SKU: OZLAMPAS202 |
| Lamp Assembly (w/Delrin block) for Model 202 Ozone Monitors with S/N < 300 SKU: OZLAMPAS(OLD) |
| Photodiode Assembly for Models 202 and 205 SKU: PDASSEMBLY |
| Cell Brace Assembly for Model 202 SKU: OZCELLBRACE202 Cell brace assembly for Model 202. Includes absorption cell, temperature sensor, heater, and voltage regulator. |
| Solenoid Valve and Cable for Model 202 Ozone Monitor SKU: OZVLV202 |
| LCD Assembly for Models 202 and 205 Ozone Monitors SKU: OZDSP |
| Select Switch for Models 202, 205, 306 and 408 SKU: SELECTSWITCH
Includes external knob (not shown). |
| Microprocessor Chip for Model 202 Ozone Monitors with S/N < 300 SKU: OZMCP |
| Power Pack for Models 202, 205, 106-L,-M,-MH,-H, 100-240 VAC Input, 1.25 Amp Output at 12 V (0.42 AMP PWR PACK HAS BEEN DISCONTINUED) SKU: PWRPK-1.25A
In the shopping cart, you will be asked to specify the country for the AC plug. |
| Set of 3 Analog Input Jacks for Model 202 and Model 205 Ozone Monitors SKU: ANINJACKS |
| Internal Power Jack and Cable for Models 202, 205, 306, 400, 410 SKU: PWRASSY |
| Serial Connector (Internal) SKU: SERCON
Mounts to instrument case. |
| Serial-to-USB Adapter SKU: SERUSB |
| Serial Cable for Connecting Instrument to Computer SKU: SERCABL
This straight-through,female-female, 9-pin serial cable is required for RS232 communication with all 2B Tech instruments. Note: Serial cables purchased through electronics stores are usually "cross over" (pins 1 and 3 cross over) and not "straight through" and won't work with 2B Tech instruments. |
| SD Card SKU: SDCARD SD card for expanded memory, recommended for use with Model 202, Model 205, and Model 211 Ozone Monitors and with Model 405 nm NO2/NO/NOx Monitor |
| SD Card Reader |
| DEW-Line Consisting of Two Nafion Tubes in Parallel for Humidity Equilibration in Models 106-L, 106-M, 202, 205 and 400 SKU: DEW
Two Dew-Lines are required for the Model 205 Dual Beam Ozone Monitor because of the two flow paths. |
| External Ozone Scrubber for Ozone Monitors SKU: SCRBEXT
Used for zeroing any ozone monitor. |
| Ozone Scrubber (Internal) SKU: SCRBINT |
| Particle Filter Housing for 47-mm Filters SKU: FILTERHS(47mm) |
| Package of Ten 47-mm Diameter, 5-6 Micron Pore Size Teflon Particle Filters SKU: FILTERPK(47mm) |
| Cleaning Loop set for Models 202, 205, 400 and 410 SKU: CLEANLOOP |
| Model 202 Field Kit (newer version w/quiet pump): 1 Quiet Air Pump, 1 Solenoid Valve, 2 Internal Ozone Scrubbers, 1 External Ozone Scrubber, 1 Lamp Assembly, 1 DewLine Assembly (for S/N > 1899) SKU: FIELDKIT202QUIET Field kit for Model 202 Ozone Monitors with serial numbers 1900 and above. Includes 1 quiet air pump, 1 solenoid valve, 2 internal ozone scrubbers, 1 external ozone scrubber, 1 lamp assembly, and 1 DewLine assembly. |
| Model 202 Field Kit (older version): Spare parts kit including: 2 Air Pumps, 1 Solenoid Valve, 2 Internal Ozone Scrubbers, 1 External Ozone Scrubber, 1 Lamp Assembly; 1 DewLine Assembly (for S/N < 1900) SKU: FIELDKIT202OLD Field kit for Model 202 Ozone Monitors with serial numbers below 1900. Also for newer Model 202 Ozone Monitors purchased with the Low-Power Option. Includes 2 air pumps (main and backup), 1 solenoid valve, 2 internal ozone scrubbers, 1 external ozone scrubber, 1 lamp assembly, and 1 DewLine assembly. |
